Page Banner

United States Department of Agriculture

Agricultural Research Service

Protecting Soils and Producing Biofuel with Corn Stover / October 27, 2008 / News from the USDA Agricultural Research Service

Read the magazine story to find out more.

Photo: ARS soil scientist Doug Karlen and technician Tanya Ferguson examine soil samples in a field of cornstalk residues. Link to photo information
ARS soil scientist Doug Karlen and technician Tanya Ferguson evaluate how harvesting cornstalk residues for ethanol production can impact soil quality, future crop production, and how ethanol production might vary with harvest methods. Click the image for more information about it.


For further reading

Protecting Soils and Producing Biofuel with Corn Stover

By Ann Perry
October 27, 2008

Those lonely cornstalks—called corn stover—left behind in the fields after the grain harvest is complete could someday become valuable raw material for the production of cellulosic ethanol. In the meantime, Agricultural Research Service (ARS) soil scientist Doug Karlen is determining which portion of the plant would work best for cellulosic ethanol production. He's also studying the amount of stover that needs to remain in the fields to prevent soil erosion and recycle essential plant nutrients.

Karlen works at the ARS National Soil Tilth Laboratory in Ames, Iowa. He partnered with a research team that harvested cornstalks at four different heights to quantify the amount and quality of stover that could be obtained using different removal strategies.

The team also evaluated several aspects of harvesting stover for ethanol production. These factors included engineering challenges associated with harvesting, how stover removal could potentially impact future crop production and soil quality, and how potential ethanol production might vary with harvest methods.

As part of the study, stover yields from the four harvest groups were converted to ethanol using biochemical processing. The researchers measured the resulting net energy yield and decided that the most likely factor driving conversion efficiency was the level of moisture in the feedstock.

After evaluating harvest convenience and speed, acceptable stover water content and other factors, the researchers concluded that a "normal cut" harvest would result in the most economical and efficient stover harvest for biofuel production. When the "normal cut" stover was harvested, at least 16 inches of stubble remained on the field.

Karlen's research is part of a larger national effort to evaluate the environmental and economic costs and benefits that might accrue from large-scale corn stover removal for cellulosic ethanol production. This project—the Renewable Energy Assessment Project, or REAP—supports corn producers who want to optimize sustainable practices that maximize production, reduce costs and protect natural resources.

Read more about this research in the October 2008 issue of Agricultural Research magazine.

ARS is a scientific research agency of the U.S. Department of Agriculture.

Last Modified: 10/27/2008
Footer Content Back to Top of Page