Page Banner

United States Department of Agriculture

Agricultural Research Service

Research Project: ORGANIC AND REDUCED INPUT FRESH MARKET SPECIALTY CROP PRODUCTION SYSTEMS FOR THE SOUTHERN GREAT PLAINS Title: Pelargonic acid formulations, application rates, and sequential applications for weed control in squash

Authors
item Webber, Charles
item Shrefler, James -
item Brandenberger, Lynn -

Submitted to: Weed Science Society of America Meeting Abstracts
Publication Type: Abstract Only
Publication Acceptance Date: March 15, 2012
Publication Date: May 1, 2012
Citation: Webber III, C.L., Shrefler, J.W., Brandenberger, L.P. 2012. Pelargonic acid formulations, application rates, and sequential applications for weed control in squash [abstract]. Weed Science Society of America Meeting Abstracts, February 6-9, 2012, Waikoloa, Hawaii. Poster #56.

Technical Abstract: Organic squash (Cucurbita pepo L.) producers need appropriate herbicides that can effectively provide season- long weed control. Research was conducted in southeast Oklahoma (Atoka County, Lane, OK) to determine the impact of potential organic herbicides on weed control efficacy, crop injury, and yields. The experiment included AXXE (registered trademark) (65% pelargonic acid) and Scythe (registered trademark) (57% pelargonic acid) applied post-directed at 1.5, 3, 5, and 10% v/v application rates, plus an untreated weedy-check and an untreated weed-free check with 4 replications. Yellow squash, cv. 'Enterprise,' was direct-seeded on June 27, 2011 into raised 91-cm centered beds. The primary weeds included smooth crabgrass (Digitaria ischaemum (Schreb.) Schreb. ex Muhl.), cutleaf groundcherry (Physalis angulata L.), and spiny amaranth (Amaranthus spinosus L.). Axxe and Scythe were post-directed applied on July 14 and then the 1.5, 3, and 5% v/v treatments were reapplied 11 days later (July 25). Weed control (total, broadleaf, and grass) increased as application rate increased, producing a minimum of 99% control 1 day after initial treatment (DAIT) for the 10% v/v rate for each herbicide. The single application of each herbicide at 10% v/v performed similarly across weed control rates (12 to 41 DAIT) to the sequential application of 5% v/v. Squash injury increased as application rates increased. The 10% v/v application rates produced the most squash injury at 1 DAIT with the 5% v/v producing the greatest injury at 12 DAIT following the sequential application. Squash yields (fruit/acre and t/acre) increased at the 5% v/v rate and declining with 10% v/v, indicating that the greater initial injury produced season-long yield reductions. All herbicide applications produced as good, or greater, yields than the weedy-check. The 5% v/v sequential applications provide additional flexibility in the timing of the weed control treatments. Additional research should focus on fine-tuning the herbicide application to control specific weeds at various maturity levels and sizes.

Last Modified: 7/28/2014
Footer Content Back to Top of Page