Page Banner

United States Department of Agriculture

Agricultural Research Service

Research Project: BIOLOGICAL, MICROCLIMATE, AND TRANSPORT PROCESSES AFFECTING PEST CONTROL APPLICATION TECHNOLOGY

Location: Application Technology Research Unit

Title: Development of digital flow control system for multi-channel variable-rate sprayers

Authors
item Liu, Hui -
item Zhu, Heping
item Shen, Yue -
item Chen, Yu -

Submitted to: Transactions of the ASABE
Publication Type: Peer Reviewed Journal
Publication Acceptance Date: February 24, 2014
Publication Date: March 27, 2014
Citation: Liu, H., Zhu, H., Shen, Y., Chen, Y. 2014. Development of digital flow control system for multi-channel variable-rate sprayers. Transactions of the ASABE. 57(1): 273-281.

Interpretive Summary: Configuration and foliage density of trees and their locations in a row vary greatly in nurseries and orchards. Variable-rate spray technology can potentially deliver precise amounts of chemicals to match tree canopy structures and to minimize sprays discharged to non-target areas. An integrated automatic digital logic control system was developed to accurately and independently control flow rates of each of the multiple nozzles coupled with pulse width modulated solenoid valves. The system integrated a data acquisition module, an embedded computer and a touch screen, pulse signal generation units, solenoid valve driver and driver protection circuits, and power supply modules. The compact and universal design of the flow control system provides flexibility and reliability for new generations of precision air-assisted and hydraulic sprayers to be connected with different sensors and terminal devices.

Technical Abstract: Precision modulation of nozzle flow rates is a critical step for variable-rate spray applications in orchards and ornamental nurseries. An automatic flow rate control system activated with microprocessors and pulse width modulation (PWM) controlled solenoid valves was developed to control flow rates of multi-channel nozzles independently for variable-rate sprayers. The system consisted of a data acquisition module, a data processing module, and a flow rate control module. An embedded computer along with a touch screen was used to process control algorithms and allowed communications between sprayer operators and the control system. The flow rate control module was designed with multi-channel driver circuits for activating solenoid valves and driver protection circuits for avoiding surge voltages due to frequent on/off actions of solenoid valves. Laboratory tests were conducted to verify the control system accuracy with three nozzles (0.530 to 1.703 L min-1) at four different operating pressures (138 to 345 kPa) and 10 duty cycles (10 to 100%). The microcontroller (MCU)-controlled circuit precisely produced PWM signals with desired pulse widths to match the duty cycles, and linear spray outputs were achieved accurately with duty cycles of PWM-controlled solenoid valves. With the protection circuit for solenoid valve drivers, the longevity of solenoid valves increased from 350 to 2,426 hours. The system had flexibility to choose the number of connection channels needed for the number of nozzles individually or in a group on sprayers. Accordingly, together with canopy structures and travel speeds from laser-scanning or other sensors, this compacted control system was capable of performing variable flow-rate functions for multiple nozzles separately.

Last Modified: 11/28/2014
Footer Content Back to Top of Page